QuickZone

• Compatible with leading conventional detectors, QuickZone has many time-saving benefits
• Generous wiring space and multiple knockouts make it quick to install
• Other fuss-free features include easy-change PCBs, simple access to batteries, a no-crimp metal earth bar, three power switch modes and no need for end-of-line modules.

• Zone interface function allows last zone to be set via DIL for non-latching operation
• Up to 32 fire zones
• DIL switch selection of twin-wire/conventional format*
• 2 open collector outputs
• 2 volt-free contacts
• 28V output
• Zone interface function allows last zone to be set via DIL for non-latching operation
• 2 inputs (class change and alert)
• Up to 6 sounder circuits
• Spare zones can be used as sounder circuits
• Common fire output and relay can be programmed to cancel on silence
• Modular expansion zone cards available
• XL system includes repeater panel.

*DIL switch selection of twin-wire not available with QuickZone XL 16-32 zone fire panel.

• Simple, clear LED indication of fire, system status and zone status
• One-button fault diagnosis
• Colour-coded keypad to manage re-sound, silence, reset, test, disable, mute and test lamps
• Simple 3-level programming accessible by keyswitch or keycode and DIL
• Disablements removed with one code
• Factory reset option
• 3-button action to disable zones
• Buzzer mute in fault condition
• In test mode, tests can be run with or without sounders
• False alarm management
• 40 event log (XL only)
• Full technical support
• 3-year warranty.

To maximise configuration options, QuickZone allows individual zones to have specific programmed options including:

• Set as latching or non-latching
• Short circuit = Fire for monitoring
• Specified for MTL5061 I.S barrier compatibility
• Compatible with schottky or zener diode bases
• False alarm management modes
• Set delays to outputs
• Silent mode for indication purposes – visual and audible alarm at panel but no sounder operation
• Detector removal monitoring can be turned off for older non-approved detectors (non-compliant to EN54.)
• Twin wire zone can be programmed to zone of origin continuous ringing. Other zones can be set to pulsing, silence or continuous.

• Two independent programmable inputs – class change and alert input
• Either or both inputs can be programmed for remote evacuation, remote silence alarm, remote reset
• Inputs programmable for indication purposes so the zone 12 LED or fault LED will illuminate
• Two additional programmable inputs (remote reset & remote silence alarms), are available on the 16-32 zone panels.

• Can be set to latching
• Fault outputs can be inverted
• Aux relays and all outputs, including sounders, are independently programmable:
  • On, off or pulsing
  • Programmed to a dedicated zone
  • Programmed with a custom response to silence alarm, evacuate, class change input, alert input or during zone delay.
• Other sounders can be switched off, pulsing or continuous
• Output delays can be applied to aux outputs and sounders (for example investigation delay for false alarm management).